How to Stack a Washer and Dryer: 10 Steps (with Pictures) (2024)

  • Categories
  • Home and Garden
  • Home Appliances
  • Washing Machines and Dryers

Download Article

Explore this Article

parts

1Choosing Your Appliances

2Installing the Machines

Other Sections

Video

Tips and Warnings

Related Articles

References

Article Summary

Co-authored byGevorg Grigorian

Last Updated: January 3, 2024

Download Article

Stacking your washer and dryer is a convenient way to save floor space in any home. As long as your washer and dryer models are compatible, you can purchase a stacking kit and make this happen! The kits distribute the weight and absorb some of the vibrations that occur when the machines are running. You’ll need a few tools and some help lifting the dryer up, but installation itself isn’t very complicated.

Get Product Support Solve Any Problem

How to Stack a Washer and Dryer: 10 Steps (with Pictures) (3)

Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!

*

*

  1. 1

    Choose compatible appliances. Theoretically, you could stack any dryer on top of a washer, as long as it fits. However, you could void the warranties on both appliances by doing this. Instead, look for washers and dryers that are designed to be stacked together.[1]

    • Usually, this means having a washer and dryer of the same brand.
    • Not all washers and dryers, even those made by the same manufacturer, can be stacked. Read the manuals, ask a salesperson, or check the manufacturer’s website to see if your models are compatible.
    • Many manufacturers sell paired washers and dryers that are conveniently designed to be stacked.
    • Stackable options are available for both front-loading and top-loading washers.
    • You can find stackable washer-dryer combos for about the same price as regular washer-dryer sets. Plan to spend around $1000 at least.
  2. 2

    Measure the site where you want to stack the appliances. Take the heights of the washer, dryer, and stacking kit (these should be mentioned on the packages or in the instructions) and add them together. Make sure the room where you want to stack the appliances is tall enough to accommodate this. You should also leave 2 inches (51mm) to 3 inches (76mm) on all sides to allow space for cords, vents, and heat dispersal.

    • Also make sure that you can comfortably reach the controls and door on the dryer.
    • Use a carpenter's level to make sure that the floor in the area is even. If not, you may need to prop up one or more of the washer's legs with shims to keep things level.
    • You can adjust the legs on some washer models to correct balance problems. Twisting the legs to the left or right will praise or lower them as needed.
    • If the site is not big enough, you will need to ask a contractor if it can be enlarged, or else choose different appliances.
    • Enlarging the space can become very expensive, and may not be allowed if you are renting.

    Advertisem*nt

  3. 3

    Plan to stack the dryer on top. Washers are heavier, especially when full of water and clothes. It can be dangerous to have this much weight raised up, so you should only stack a dryer on top of a washer, not the other way around.[2]

    • The length and width of the dryer must be no larger than the washer’s. Stacking a dryer on top of a smaller washer can cause it to fall.
  4. 4

    Purchased an approved stacking kit. It’s best to buy a stacking kit made by the same manufacturer as the washer and dryer. You can buy aftermarket stacking kits, but these may void your washer/dryer warranty unless they specifically have the manufacturer’s approval.

    • Stacking kits should be available wherever you can buy washers and dryers.
    • They will contain a support system to raise the dryer up, as well as brackets to attach the washer and dryer to each other.
    • Stacking kits start at about $40 and go up to $100 or more.
  5. Advertisem*nt

Part 2

Part 2 of 2:

Installing the Machines

Download Article

  1. 1

    Follow the manufacturer's instructions for prepping the appliances. Most likely, you will need to unscrew the legs from the dryer so it can be safely stacked. The manufacturer may also ask you to place adhesive foam backing on top of the washer to cushion the dryer and reduce vibrations. If so, this should be included with the stacking kit.

    • Keep the legs in a safe place in case you decide to unstack your appliances later.
    • Position the washer at least a few inches away from the wall. You'll need enough space to be able to attach everything, but you don't want the appliances so far away from the wall that it's hard to slide them back into place when you're done.
  2. 2

    Carefully lift the dryer up, with help. At least two people will need to work together to lift the dryer up. Squat bent at the knees, and place your hands underneath the dryer. Lift carefully, using your legs rather than your back to pull the weight. Place the dryer on top of the washer.

    • Dryers are heavy. Lifting one improperly can cause injury.
    • Lift carefully and ask for more help if you need it.
  3. 3

    Secure the appliances to each other. Your stacking kit should include an attachment or bracket that will join the washer and dryer together. Most of the time, this is placed on the back of the appliances. Attach it according to the manufacturer’s instructions.

    • Most likely, the attachment or bracket will be held in place with bolts, so you’ll probably need an adjustable wrench for this.
  4. 4

    Attach any water, gas, and vent lines. Once your stacked washer and dryer are bolted together, attach the water hoses to the washer and the gas line (if applicable) and air vent to the dryer, according to the manufacturer’s instructions. Make sure they are secured properly to prevent leaks.

    • Do this just after you attach the washer and dryer with the bracket. Since the appliances will be pushed away from the wall to attach the bracket, you can easily reach the connections.
    • Washers will have a water supply hose and a drain hose. Attach both of these.
    • Dryers will have a vent duct that needs to be attached to a vent going outside. If you have a gas dryer, you will also need to attach the gas line.
  5. 5

    Plug in the appliances and slide them into place. After connecting the hoses, vent duct, and gas lines, plug in the electrical cords for both the washer and dryer.

    • Now that everything is connected, you can carefully push the washer and dryer into position near the wall. Remember to leave 2 inches (51mm) to 3 inches (76mm) of clearance!
  6. 6

    Try a test load. Run an empty washer through a regular cycle. Then, turn the empty dryer on and let it run for a while. Pay attention while the appliances are running. Some vibration is expected, but you want to make sure that neither rocks or sways. If they do, it may be a sign that your washer is not level.

  7. Advertisem*nt

Expert Q&A

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisem*nt

      Video

      Tips

      • Some models of vented dryers can be wall-mounted rather than stacked. Not all models can be installed this way. If yours can, you will still need to use a heavy-duty bracket to attach it to the wall.[3]

        Thanks

        Helpful0Not Helpful0

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Submit

      Thanks for submitting a tip for review!

      Advertisem*nt

      You Might Also Like

      How to Release a Stuck Washing Machine DoorHow toDisconnect a Washing Machine
      Samsung Washer Door Locked and Not Opening? Try One of These SolutionsHow to Find and Clean the Filter in Your Washing MachineHow toUse a Washing MachineHow to Bypass a Magnetic Lid Switch on a Whirlpool WasherHow to Change a Clothes Dryer BeltHow toUse Bleach in Your Washing MachineHow toHook up a Washer and DryerEverything You Need to Know About Resetting Samsung WashersHow toUnlock a Whirlpool WasherHow toInstall a Washing MachineHow toDry Shoes in the DryerHow toDrain a Washing Machine by Hand

      Advertisem*nt

      About This Article

      How to Stack a Washer and Dryer: 10 Steps (with Pictures) (29)

      Co-authored by:

      Gevorg Grigorian

      Appliance Repair Expert

      This article was co-authored by Gevorg Grigorian. Gevorg Grigorian is an Appliance Repair Specialist and the Owner of G and R Appliance Repair in Los Angeles, California. With over 12 years of experience, Gevorg specializes in residential and commercial appliance repairs as well as heating, ventilation, and air conditioning (HVAC) services. Gevorg holds a BS in Business Administration and Management from California State University-Northridge. This article has been viewed 218,967 times.

      106 votes - 85%

      Co-authors: 7

      Updated: January 3, 2024

      Views:218,967

      Categories: Washing Machines and Dryers

      Article SummaryX

      Before stacking your washer and dryer, measure the height and width of the area where you want them to go. Then, compare the measurements to the combined height of the washer, dryer, and stacking kit, and the width of the appliances to make sure everything will fit. When your ready to stack the appliances, remove the legs from the dryer and apply adhesive foam to the top of the washer to cushion vibrations. Next, lift the dryer into position with help from another person and attach it to the washer using a bracket. Finally, hook up the water supply and plug in your appliances. For tips on how to choose a stacking kit and how to connect the water supply, read on!

      Did this summary help you?

      In other languages

      Spanish

      French

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 218,967 times.

      Did this article help you?

      Advertisem*nt

      How to Stack a Washer and Dryer: 10 Steps (with Pictures) (2024)
      Top Articles
      Latest Posts
      Article information

      Author: Tuan Roob DDS

      Last Updated:

      Views: 6026

      Rating: 4.1 / 5 (62 voted)

      Reviews: 85% of readers found this page helpful

      Author information

      Name: Tuan Roob DDS

      Birthday: 1999-11-20

      Address: Suite 592 642 Pfannerstill Island, South Keila, LA 74970-3076

      Phone: +9617721773649

      Job: Marketing Producer

      Hobby: Skydiving, Flag Football, Knitting, Running, Lego building, Hunting, Juggling

      Introduction: My name is Tuan Roob DDS, I am a friendly, good, energetic, faithful, fantastic, gentle, enchanting person who loves writing and wants to share my knowledge and understanding with you.